Tractor Tech Articles
Tech Articles
Need some guidance on servicing or repairing your modern, antique or vintage tractor? Read through our technical articles from contributors, in house staff and engineering experts.
International Harvester 434 Major Works Part 6 - Camshaft
The camshaft and cam followers (tappets) are often ignored during an engine rebuild - in this article contributor Andrew explains how to check them, and how to change the gear or adjust the end float.
International Harvester 434 Major Works Part 5 - Timing Gears
The latest in Andrew's series of articles recording the major overhaul of his International Harvester 434 tractor. In this instalment Andrew focuses on timing gears.
Ferguson TED20 - Removing The Clutch Release Bearing - Video Tutorial
Gordon begins work on the clutch on his Ferguson TED20 - this video focuses on removing and replacing the clutch release bearings.
-200x200.png "Ferguson TED20 - Fitting the Oil Filter Housing - Video Tutorial")
Ferguson TED20 - Fitting the Oil Filter Housing - Video Tutorial
Common signs of failed oil filter housing and a video tutorial on how to fit a replacement oil filter housing unit on your tractor with Gordon from Waterhouse Forde.
-200x200.png "Ferguson TED20 - Engine Block Coolant Drain Tap - Video Tutorial")
Ferguson TED20 - Engine Block Coolant Drain Tap - Video Tutorial
In this video Gordon assesses the coolant tap on his TED20 to see if it is salvageable after a clean up and refacing in order to retain the authentic look without compromising on functionality.
International Harvester 434 Major Works Part 4 - Strip, Clean & Initial Inspection
In Andrew's latest article he focusses on the stripping, cleaning and initial inspection of the various components fitted to the engine block on his International Harvester 434.
-200x200.png "International Harvester 434 Major Works Part 3 - The Oil Filter That Didn't")
International Harvester 434 Major Works Part 3 - The Oil Filter That Didn't
An oil filter is meant to filter oil and this engine didn’t filter oil at all. Read Andrew Chapman's article as he investigates the issue with his BD154 engine on an International Harvester 434.
Ferguson TED20 - Dismantling The Rocker Arm - Video Tutorial
In this latest video Gordon takes us through the process of dismantling,
cleaning and inspecting the rocker arm assembly on his Ferguson TED20.
Ferguson TED20 - Fitting the Cylinder Head - Video Tutorial
In this video Gordon takes us through the process of fitting the cylinder head on his Ferguson TED20 tractor.
Ferguson TED20 - Fitting the Timing Gear Video tutorial
In this video Gordon takes us through the process of fitting the timing gear on his Ferguson TED20 tractor.