Ferguson TED20 - Removing The Front Axle Tractor Video

In this video Gordon from Waterhouse Forde removes the front axle of his Ferguson TED20 tractor.


'After splitting the tractor, we now need to remove the front axle to leave the engine free to be rebuilt. From this point it is quite simple, you just need to work carefully and methodically to keep everything and everybody safe!

Oscar and I also removed the timing cover and timing chain etc. Oscar had great fun removing the years of dirt and the gasket materials from the front of the engine.'


On their smallholding in north Devon Gordon, Kathy and Oscar spend many weekends working on their land and their tractors.  In this video Gordon and Oscar takes you through the steps to help remove the front axle of your Ferguson tractor and will walk you through each process, with advice along the way.



Visit their channel for more instructional videos for your tractor: Waterhouse Forde



Ferguson TED20 -  Removing The Front Axle Tractor Video.

 



Sign Up Here

Licence Terms

You are free to: Share, copy & redistribute the material in original format for any purpose as long as you follow the license terms below:

  • Attribution – you must give appropriate credit and provide a link to the original article in a reasonable and visible manner
  • You may not in any way suggest that the licensor endorses you or your use.
  • No Derivatives – The material must be distributed in full, including disclaimer, you may not distribute or share modified material.
  • No additional restrictions – You may not apply legal terms that legally restrict others from doing anything the licence permits.
  • No warranties are given. The license may not give you all of the permissions necessary for you intended use. For example other rights such as publicity, privacy, or moral rights may limit how you use the material.

Disclaimer

Anglo Agriparts nor any such reviewers or contributors of content provides any warranty or guarantee as to the accuracy of any information on this website and cannot accept liability for any errors or omissions. The information in this article are for general information purposes only. It does not constitute legal, technical and/or commercial advice and should not be relied upon as such. Specific advice should always be sought separately. Despite the authors best efforts the information provided in this article may not be accurate, up to date or applicable to the circumstances of any particular case. Anglo Agriparts nor the author of this article make no representations or warranties of any kind regarding the completeness or accuracy of the information contained herein and accepts no liability for loss or damage whatsoever and howsoever arising from reliance on it, regardless of whether such information originates from Anglo Agriparts, or our contributors. Anglo Agriparts has no control over the content on any other website accessed through this website and accepts no liability for any loss or damage whatsoever and howsoever arising from reliance upon the content of such websites. Neither Anglo Agriparts nor any reviewer or contributor of content on the website shall be liable to any person for any loss or damage which may arise from the use of the information contained in this article or on this website. These exclusions of liability will not apply to damages arising from death or personal injury caused by the negligence of Anglo Agriparts or any of its employees or agents or of a reviewer or contributor of content.

  • Ferguson TED20 - Removing The Front Axle Tractor Video

Related Articles

Ferguson TED20 - Removing the Axle Pivot Pin - Video Tutorial

Ferguson TED20 - Removing the Axle Pivot Pin - Video Tutorial

On inspection Gordon discovers the axle pivot pin isn't in the condition he hoped.  Here Gordon guides us through the process of removing the axle pivot pin on his TED20 restoration project.

Ferguson TED20 - Assembling The Front Axle - Part 2 - Video Tutorial

Ferguson TED20 - Assembling The Front Axle - Part 2 - Video Tutorial

Part 2 in the assembly of the front axle. Gordon continues the work started in Part 1 on his TED20.

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments