Video Tutorials - Tractor Servicing & Restoration

Tractor Servicing & Restoration

We have teamed up with Waterhouse Forde on the restoration of their 1952 Ferguson TED20. Gordon provides a step by step guide to restoring and servicing his tractor.


Ferguson TED20 - Stripping Front Wheel Hubs - Video Tutorial

Ferguson TED20 - Stripping Front Wheel Hubs - Video Tutorial

Ferguson TED20 - Stripping Front Wheel Hubs - Video Tutorial. In this video Gordon continues with the strip-down of the front axle moving on to strip the front wheel hubs and remove the spindle.

Ferguson TED20 - Removing the Axle Pivot Pin - Video Tutorial

Ferguson TED20 - Removing the Axle Pivot Pin - Video Tutorial

On inspection Gordon discovers the axle pivot pin isn't in the condition he hoped.  Here Gordon guides us through the process of removing the axle pivot pin on his TED20 restoration project.

Ferguson TED20 - Servicing the Starter Switch - Video Tutorial

Ferguson TED20 - Servicing the Starter Switch - Video Tutorial

Gordon and Oscar show us how to service the starter switch in this latest instalment in the series of his TED20 restoration.

Ferguson TED20 - Mounting the Engine to the Tractor - Video Tutorial

Ferguson TED20 - Mounting the Engine to the Tractor - Video Tutorial

It's all hands on deck as Gordon undertakes the task of mounting the engine to his Ferguson TED20 using an engine leveller.

Ferguson TED20 - Fitting the Flywheel and Clutch - Video Tutorial

Ferguson TED20 - Fitting the Flywheel and Clutch - Video Tutorial

Contributor Gordon reaches a crucial stage in the restoration of his TED20 - in his latest tutorial he fits the flywheel and clutch.

 Ferguson TED20 - Dismantling the Front Axle - Video Tutorial

Ferguson TED20 - Dismantling the Front Axle - Video Tutorial

 Ferguson TED20 - Dismantling the Front Axle - Video Tutorial. Gordon removes the front axle in order to inspect it's condition in preparation for the next stage of the restoration.

Ferguson TED20 - Fitting the Release Bearing & Layshaft Bush  - Video Tutorial

Ferguson TED20 - Fitting the Release Bearing & Layshaft Bush - Video Tutorial

Gordon fits the release bearing and layshaft bush on his tractor in this latest tutorial in the series following the restoration of his TED20.

Ferguson TED20 - Removing The Clutch Release Bearing - Video Tutorial

Ferguson TED20 - Removing The Clutch Release Bearing - Video Tutorial

Gordon begins work on the clutch on his Ferguson TED20 - this video focuses on removing and replacing the clutch release bearings.

Ferguson TED20 - Fitting the Oil Filter Housing - Video Tutorial

Ferguson TED20 - Fitting the Oil Filter Housing - Video Tutorial

Common signs of failed oil filter housing and a video tutorial on how to fit a replacement oil filter housing unit on your tractor with Gordon from Waterhouse Forde.

Ferguson TED20 - Engine Block Coolant Drain Tap - Video Tutorial

Ferguson TED20 - Engine Block Coolant Drain Tap - Video Tutorial

In this video Gordon assesses the coolant tap on his TED20 to see if it is salvageable after a clean up and refacing in order to retain the authentic look without compromising on functionality.  

Showing 1 to 10 of 51 (6 Pages)
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments