Ferguson TED20 - Making a Sleeve Puller Part 2 Tractor Video Tutorial

In this video Gordon from Waterhouse Forde makes a sleeve puller for his Ferguson TED20 tractor (Part 2).

'In part 2 we finish making the final parts and assemble the puller. The trickiest part is making sure the four pillars are identical in length, we came up with a really simple solution using the lathe as a jig!'


On their smallholding in north Devon Gordon, Kathy and Oscar spend many weekends working on their land and their tractors.  In this video Gordon and Oscar takes you through the final steps to make a sleeve puller for your Ferguson tractor, and will walk you through each process, with advice along the way. 



Visit their channel for more instructional videos for your tractor: Waterhouse Forde

Ferguson TED20 - Making a Sleeve Puller Part 2

Anglo Agriparts stock 1000's of parts for Ferguson tractors, buy parts for your Ferguson TE20:

Buy Ferguson TED20 Parts >>   Ferguson TE20 Serial Numbers >>   The History Of Ferguson >> 


Licence Terms

You are free to: Share, copy & redistribute the material in original format for any purpose as long as you follow the license terms below:

  • Attribution – you must give appropriate credit and provide a link to the original article in a reasonable and visible manner
  • You may not in any way suggest that the licensor endorses you or your use.
  • No Derivatives – The material must be distributed in full, including disclaimer, you may not distribute or share modified material.
  • No additional restrictions – You may not apply legal terms that legally restrict others from doing anything the licence permits.
  • No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example other rights such as publicity, privacy, or moral rights may limit how you use the material.

Disclaimer

Anglo Agriparts nor any such reviewers or contributors of content provides any warranty or guarantee as to the accuracy of any information on this website and cannot accept liability for any errors or omissions. The information in this article are for general information purposes only. It does not constitute legal, technical and/or commercial advice and should not be relied upon as such. Specific advice should always be sought separately. Despite the authors best efforts the information provided in this article may not be accurate, up to date or applicable to the circumstances of any particular case. Anglo Agriparts nor the author of this article make no representations or warranties of any kind regarding the completeness or accuracy of the information contained herein and accepts no liability for loss or damage whatsoever and howsoever arising from reliance on it, regardless of whether such information originates from Anglo Agriparts, or our contributors. Anglo Agriparts has no control over the content on any other website accessed through this website and accepts no liability for any loss or damage whatsoever and howsoever arising from reliance upon the content of such websites. Neither Anglo Agriparts nor any reviewer or contributor of content on the website shall be liable to any person for any loss or damage which may arise from the use of the information contained in this article or on this website. These exclusions of liability will not apply to damages arising from death or personal injury caused by the negligence of Anglo Agriparts or any of its employees or agents or of a reviewer or contributor of content.

  • Ferguson TED20 - Making a Sleeve Puller Part 2 Tractor Video Tutorial
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone
Comments